Description of pneumatic pressure calibration hand pump hand pressure calibrator
Y039 Hand-operating Pressure Pump is a liquid hand pressure pump. It is used to calibrate the pressure instruments of the industrial process in the field and/or control room. Also it can be used as a pressure generator for pressure instruments, All kinds of pressure transmitter and pressure gauge and other pressure instrument that with a pressure below 1.6mpa, can be calibrated by this pressure pump.
Y039 hand-operating pressure pump(see attachment) is compose of cylinder, piston rod, trim adjustment valve, switch valve, handle, quick connector etc. The quick connector is used to connect the calibrated instrument and the standard gauge. When use it, press and relive the handle for several times, to drive the piston rod reciprocating motion, change the volume of the cylinder, can produce the output pressure of 0-1.6mpa.
Features of pneumatic pressure calibration hand pump hand pressure calibrator
The hand-operating pressure pump is portable, light weight, wide temperature range, easy to use. There is a trim adjustment handle valve and switch valve on the pump, so that it is easy to adjust the pressure or exhaust the air.
There are also matched fast connection, nylon hose, instrument connector etc, used to connect the calibrated instrument and the standard gauge. The pump is easy to carry and to connect with the calibrated instruments in the field, so the operator can calibrate the instrument fast and simple.
Specification of pneumatic pressure calibration hand pump hand pressure calibrator
| Pressure range |
0~1.6Mpa |
Weight |
1Kg |
| Temperature |
-20~50℃ |
Relative humidity |
≤100% |
| Accessory |
Joint 2pcs
Quick connector 2pcs
Joint cap 4pcs
Seal ring 4pcs
Seal gasket 2pcs
6x1 nylon hose 2pcs
Internal six angle screw wrench 1pc |
Detailed Images of pneumatic pressure calibration hand pump hand pressure calibrator
|
|
16bar Hand pump with pressure gauge pressure calibrator pneumatic pressure calibration Images
|
